New Propel S1 10Kw Electric Outboard Motor

The Propel S1 is an advanced and innovative electric outboard motor. With a power of 10 kW and high torque at low speed, this engine is suitable for any application on the water. The unique ‘pancake’ design ensures that everything above the waterline is processed, making water damage such as fishing lines and ropes less likely to damage the engine. The Propel S1 is supplied as standard with an HD display, 4-blade propeller, magnetic key as a replacement for the dead man’s cord and stainless steel throttle lever. In addition, the Propel S1 is compatible with the matching Propel B1 lithium batteries.

Propel S1

Comparable to a 25 hp petrol engine
7 kW | 10 kW | 13 kW
Manual tilt (4 positions)
High-end touchscreen display

Propel B1 lithium battery

The Propel B1 battery is a powerful, reliable and durable lithium battery that is specially designed for the Propel S1 outboard motor. What makes this battery so unique is that it is modular, meaning it can be expanded from one unit to as many as 16 units. This gives the user the opportunity to increase the range of the boat and improve the performance of the outboard motor. With an average speed of 6 km/h it is possible to sail for up to 10 hours on a 10.2 kWh battery pack.

Propel S1 Sets

A complete set comes complete with:
Propel S1 engine
Propel battery pack
Lithium charger
Side mounting controls
Touchscreen display
PDU (control unit)
All cables, busbars and connections

Remote control and stick controls

The Propel S1 is supplied with remote control or stick control at no additional cost.

Propel S1

Continuous power: 10 kW
Comparable to petrol engine: 25 hp
Voltage: 48V
Weight in kg: 47 Kg
Tail length short tail in cm: 38.5 cm
Tail length long tail in cm: 51.2 cm
Tail length extra long tail in cm: 63.9 cm
Operation : Steering wheel with remote control or stick
Tilt: Yes
Trim: Manual, 4 positions
Onboard computer: Yes
Stepless acceleration: Yes
Suitable for: sloops, rubber boats, console boats and motor boats

SPECS:

Performance

MOTOR
Saietta AFT140i-48V — Fully-sealed yokeless dual-rotor axial- flux permanent magnet alternating current (PMAC) motor (also known as a pancake motor), with integrated controller.

INPUT POWER
7, 10 and 13 kW continuous input power

DRIVE
22T:13T ratio, with max propellor speed at 1500 RPM

COOLING
Closed loop glycol cooled with frost protection until -20°C

PROPELLOR
12.9 inch with 13.1 inch peak pitch 4-blade hard anodized (Hardcoat) aluminium Optimised for 1500 RPM and general use

Controller

CONTROLLER
Automotive quality controller, with vector current control

VOLTAGE
Low & safe voltage 48 VDC

COMMUNICATION
CAN bus (display, throttle & BMS)

COMPATIBILITY
Pre-configured for Propel B1 batteries

Chassis

CHASSIS & COVER
Aluminium chassis for motor and shaft. Plastic top branded cover with locking mechanism

MOUNTING CLAMP
Aluminium transom mount with manual tilt mechanism, chassis with integrated grip

TRIM MECHANISM
Manual, 4-step, 13, 20, 27, 34 degrees

Other

SHAFT LENGTHS
15-inch, 20-inch, 25-inch

WEIGHT
Approx 47 Kg

Throttle options

1. SIDE MOUNT THROTTLE WITH TOPCON SCREEN

5” WVGA capacitive touchscreen (IP66), sunlight readable, stainless steel mounting frame, charge led and key. Stainless steel side mount throttle control lever, CAN bus connected. Compatible with Propel B1 batteries

2. SIDE MOUNT THROTTLE WITH BMV SCREEN

Victron BMV-712 screen, stainless steel mounting frame, charge led and key. Stainless steel side mount throttle control lever, CAN bus connected. Compatible with most 48 V batteries

3. TOP MOUNT CONTROL
Simple and robust design, with sun readable display

4. TILLER
Stainless steel tiller with sun-readable display

• Availability:78 In Stock
• Model:S1
• Brand: